Hayter Drive Shafts
Replace damaged or worn drive shafts with genuine Hayter components ensuring smooth power transmission from engine to wheels or cutting deck. Our Hayter drive shaft range includes crankshafts for blade mounting and engine timing, axle shafts transferring power to rear wheels, spindle shafts supporting mower deck blades, complete Hayter drive shaft replacement assemblies with bearings fitted, shaft keys and keyways preventing slippage, and model-specific shafts for Harrier, Spirit, and Ranger mowers. Each Hayter mower drive shaft features precision machining maintaining correct tolerances and alignment. Bent or damaged shafts cause excessive vibration and unsafe operation requiring immediate replacement. Stock held ready for fast dispatch with next-day UK delivery plus shipping available worldwide.
Available Hayter Drive Shafts
Drive Shaft Retaining Collar
134-4513
Hayter
£0.79
View More
Shaft Roller
411038
Hayter
£27.82
In Stock
Roller Shaft (48)
111-8722
Hayter
£33.24
In Stock
Roller Shaft W/A
560034
Hayter
£54.52
In Stock
Roller Shaft Bearing
111-1717
Hayter
£53.78
In Stock
Shaft Roller Pro
134-2632
Hayter
£56.31
In Stock
Jack Shaft Assembly
134-2226
Hayter
£49.78
In Stock
Shaft Spindle
80-4341
Hayter
£33.78
In Stock
Roller Shaft
111-8601
Hayter
£45.32
Available
Roller Shaft W/A H48
111-1727
Hayter
£44.96
Available
Belt - Engine Crankshaft To Variable Pulley
SA284920
Hayter
£25.33
Available
Cross Shaft
212051
Hayter
£86.09
Available
Frequently Asked Questions
What causes a Hayter drive shaft key to shear?
The shaft key shears when your Hayter mower blade strikes immovable objects like rocks or stumps - the blade stops suddenly whilst the engine continues spinning, breaking the soft metal key protecting expensive shaft damage. Loose blade bolts allow the blade to hammer back and forth eventually shearing the key. Running with a sheared key causes the engine to misfire, run rough, or kick back violently when starting as ignition timing becomes incorrect. Always replace sheared keys immediately and check why it failed - loose bolts or bent shafts cause repeated shearing.
Can I straighten a bent Hayter drive shaft instead of replacing it?
Never attempt straightening a bent Hayter mower drive shaft - the metal weakens during bending and straightening creates stress points that can fail catastrophically whilst the blade spins at three thousand RPM. A weakened shaft risks breaking during operation sending the blade flying, causing serious injury. Straightening also never fully restores proper balance causing ongoing vibration and premature wear to bearings and engine mounts. Always invest in genuine Hayter drive shaft replacement when bent - your safety and your mower's longevity depend on structurally sound components.
Why does my Hayter vibrate after hitting something solid?
After striking rocks or stumps, vibration usually indicates either bent blade, bent Hayter drive shaft, or sheared shaft key. First check the blade for bends or damage and replace if necessary. If vibration continues with new blade, the shaft is likely bent. Sometimes the impact shears the flywheel key or blade mounting key causing the blade to sit loose and vibrate. Check all mounting bolts are tight and keys intact. Severe impacts can bend shafts even slightly - just a few thousandths of an inch bend causes noticeable vibration at operating speeds.
How do I know if my Hayter drive shaft is bent?
Excessive vibration whilst the engine runs indicates a bent Hayter drive shaft, especially vibration that worsens when blades engage. Listen for grinding or clunking noises during operation. Check if grass cuts unevenly despite sharp blades - bent shafts cause unbalanced blade rotation. To test, disconnect the spark plug, tip the mower safely, and spin the blade by hand whilst watching the centre bolt - if it wobbles noticeably as the blade rotates, the shaft is bent. Hitting rocks, tree roots, or solid objects commonly bends shafts requiring immediate Hayter drive shaft replacement.
What's the difference between crankshaft and axle shaft on my Hayter?
The crankshaft connects to your mower blade and rotates with the engine providing cutting power, whilst axle shafts transfer power from the transmission to the wheels providing drive. Crankshaft damage causes vibration, rough running, and cutting problems. Axle shaft damage prevents wheels turning properly or causes clicking noises during movement. Both require Hayter drive shaft replacement when damaged but serve completely different functions. Crankshafts experience higher speeds and impacts from blade strikes, whilst axle shafts handle transmission torque and wheel resistance. Always identify which shaft needs replacing before ordering parts.